You’ll always be prepared when nasty weather strikes with the HYDROlite 2.0 FR extreme weather kit. The HYDROlite 2.0 FR extreme weather kit comes with the FR jacket, FR bib overall and a black mesh gear bag for handy storage. Read more details by downloading the spec sheet.
- Arc Rating: 31 cal/cm²
- CAT 3
- Fabric/Material: 8.3 oz. GORE-TEX PYRAD®
- Waterproof garments pass a one-hour storm shower test
- Fast drying lightweight and breathable FR fabric
- FR segmented silver reflective trim
- Covered D-ring opening for fall protection
- Two front pockets with hook and loop closure flaps
- Snap-off adjustable hood
- Covered zip front closure with zipper pull
- Front bib pocket
- Lined hand warmer pockets
- Heavy duty quick release suspender system
- Covered zipper closure on legs
- Field repair kit is available (sold separately)
- Made in the USA
HYDROLITE FR™ 2.0
FEATURING GORE-TEX® PYRAD® TECHNOLOGY
HYDROlite FR™ 2.0 combats extreme weather elements while exceeding the required arc flash and flame resistant protection you need. Rain, sleet and snow roll off of breathable GORE-TEX PYRAD® fabric and keeps the chill at bay.
COMFORT ENCOURAGES COMPLIANCE
Comfortable rain gear that provides arc flash and foul weather protection enables electrical utility workers to safely work long hours in challening conditions and on challenging tasks. GORE-TEX PYRAD® fabric combines protection from arc flashes with a PPE CAT Level 3 rating, waterproof and windproof protection as well as hi-visibility protection that meets and exceeds ANSI 107-2020 and CSA Z96-15. GORE-TEX PYRAD® fabric provides utility lineman proven protection from the elements, arc flash exposure with the comfort and durability needed in utility workwear.
2016 survey of safety professionals that were asked “What do you think are the main reasons for noncompliance with PPE protocols?”
BUILDING A LAYERED
CLIMATE SYSTEM
HIGH-PERFORMANCE OUTER SHELL
Waterproof garments keep weather out, while wind-blocking helps maintain warmth. Breathable fabrics and moisture wicking technologies prevent overheating and allowing perspiration to escape, keeping you comfortable and dry inside and out.
HEAD PROTECTION
Look for breathable and moisture wicking to reduce heat loss without overheating.
MOISTURE WICKING LAYER
It’s important to stay dry because moisture against the skin contributes to an increased rate of heat loss. According to the CDC, hypothermia can occur at mild temperatures (above 40 degrees F) “if a person becomes chilled from rain, sweat, or submersion in cold water.”
LIGHT, LOOSE LAYERS
Well-fitting garments that are not skin tight provide better insulation due to air gaps, which help keep you warm without overheating. Light layers provide the ability to adjust to changing temperatures through the day by removing layers, versus one heavy and bulky garment.
INSULATION LAYER
Sweatshirts or fleece jackets work to keep warm air in and can be easily removed as conditions change. Zip fronts are more practical because they can be unzipped to release hot air as you work up a sweat.
Breathability
Breathability Testing with RET
- Testing is precise and at controlled conditions
- Simulates actual interaction between body and textile garments
- RET value measured with the Skin Model correlates directly with the wearer’s skin wetness (comfort) on the garments
Staying Dry is Important in Arc Flash Hazards
- Excess moisture increases the risk for more severe burns (from steam) in the event of an arc flash.
BREATHABILITY TESTING WITH RET
Water Proof
WATER-PROOF PERFORMANCE
Low Water Pick-Up
- Garments stay lightweight in wet conditions
- Dry faster
High Water Pick-Up
- Garments get heavier
- Longer dry time = opportunity for odor/bacteria growth
