- CM-1560 Clamp meter with Certificate of Calibration
- Measures AC+DC current
- AC and AC+DC voltage measurements with digital low pass filter for accurate readings on variable frequency drives
- Also measures DC voltage, resistance, capacitance and frequency
- Tests continuity and diodes
- Flashlight inside clamp jaw for easier work in dark locations
- Backlight & relative mode for added versatility
- Peak-RMS measures motor in rush current
- AmpTip™ increases accuracy on small wires and low current
- Measurement tool comes with two voltage detection modes – non-contact or using a single test lead
- Data hold
- Recording of Maximum, Minimum, and Average readings
- Crest (peak hold) feature captures current or voltage peaks as short as 5 milliseconds
- Lifetime warranty
Specifications
| Amperage Measurement | 60, 600, 1000 Amps AC+DC |
| Display | LCD, 6000 Count |
| Frequency Rating | Voltage: 50/60 Hz. Current: 40 to 400 Hz |
| Includes | (2) 1.5V AA batteries, test leads, carrying case |
| Jaw Opening | 2.0” (51 mm) |
| Measurement Category | CAT III 1000V, CAT IV 600V |
| Replacement Part | TSG-3 test leads, TC-30 carrying case |
| Resistance Measurement | 600, 6k, 60k Ohms |
| Standard | CAT IV, C/US UL Listed, CE |
| True Power | AC+DC True RMS |
| Voltage Measurement | 600, 1000 Volts AC/DC |
