ASTM F711 compliant
■ Dual crossarm brackets to fit up to a 6” x 6” crossarm
■ Fits up to 1.6” cable
■ Rated for 34.5kV with insulators and 15kV without insulators
■ Easy to install
■ Furnished with bronze eye bolts
■ Comes with 2 wireholders AND 2 insulators
The Slingco Fiberglass Extension Arm is used to move conductor to create working clearance in congested areas, or as a temporary aid in replacing insulators and/or conductor.
The Fiberglass Extension Arm complies with ASTM F711, OSHA 1910.269 (j)(l), and OSHA 1926.957 (a)(l).
The arm is rated for 34.5kV with insulators and 15kV without insulators.
It includes a double bracket system that will fit over crossarms up to 6” x 6”.
The wire holders will accommodate cables up to 1.6” in diameter.
The Slingco Fiberglass Extension Arm includes a QR code so the manual and instructions are always accessible in the field – just scan to view on your cell phone.
“Retrofit Kit” part# ITP10925 is available for use on composite crossarms. Retrofit Kit includes removable rubber “grippers”
The retrofit kit ensures the eye bolts do not penetrate the crossarm.
