- Optimized hydraulics offer 20% faster advance and 30% faster retraction speeds than previous generation tools.
- Patent pending Auto-Retract feature provides a user-selectable ON/OFF switch to enable or disable automatic cycle retraction. Auto-Retract can also be stopped mid-cycle to speed repeat operation.
- Latched cutting head for superior shear strength on tough materials.
- Open scissor type cutting blades allow for easy cable insertion and positioning without the need to latch the head closed prior to cutting.
- 180Ëš rotating head for ease of use and manueverability
Large copper cable cutting is finally made easy with the REC-734YC – just pull the trigger and 6.6 tons immediately goes to work for you. The hydraulic system now features a rapid advance for reduced cycle times. This tool is similar to the REC-730Y|but has a slightly larger jaw opening without a “keeper” guard. Its sharp blades are rated for copper and aluminum cables only|up to 800 MCM or 1.4″ Al outside diameter.; The open “C” type jaw is very convenient for the operator when reaching out to cut cable|as opposed to latching a cutting jaw around the cable. The jaws will accept a maximum of 800 MCM copper or aluminum cables up to 1.4.” Distortion of the cable is minimal and cables can still be sleeved easily. Once the cable is severed|the cutter blades can be opened by the push of the release trigger located below the activation trigger – one finger is all that is needed to cut and release the tool. NOTE: DO NOT CUT STEEL.
